Market Stalls (frames only)

Buyer note:
This is the frame only version of this product and does not include any accessories. Head here to purchase the full kit.

Whether it's hot potatoes, fresh bakery, drinks, snacks or even non-food products, our food market stall design provides the perfect selling platform with ample covered working and storage space behind the counter. If you're planning on selling food you may also be interested in our glass clear side sheets and sneeze guards which cover the sides and front of the stall to comply with health and hygiene regulations. With a maximum length of 6ft 6 inches, this market stall is designed to fit in a medium sized van. Counter height is 30 inches.

This Market Stall is available in the following sizes:

• 6ft x 6ft
• 8ft x 6ft
• 10ft x 6ft

Price varies depending upon size, select from the options above to see full details.

This is the frame only version of our Food Market Stall product. The following items are available to purchase as optional extras as part of the full kit which is available here:

• Black Hammer Effect Painted Steel Market Stall Frame
• Tarpaulin (optional)
• 10 x spring clamps (optional)
• 9mm exterior grade plywood counter boards (optional)

Please ensure that your vehicle can transport this Market Stall's longest bar length (see 'max length' in table below for full details).

Download the PDF data sheet for this Market Stall
(We're currently working on new data sheets for our market stalls. Consequently, some of the information contained in this data sheet may be very slightly out of date).

Steel Frame
Market Stall frames are manufactured from 25mm x 25mm (1 inch x 1 inch) steel box section tube, the industry standard for Market Stall frames. They are finished in a black hammerite paint. Frames slot together using a pin and socket system as pictured above.

Buyer note:
This is the frame only version of this product and does not include any accessories. Head here to purchase the full kit.

Our Demonstrator Market Stalls are typically used by traders who sit or stand behind the counter in the cut-out at the rear of the stall in order to demonstrate household products such as carpet detergents or vacuum cleaners, perfumes or even power tools. The cutout brings the trader closer to the front of the stall and allows a better opportunity to grab the attention of curious passers by. Counter height is 30 inches.

This Market Stall is available in the following sizes:

• 8ft x 4ft
• 10ft x 4ft

Price varies depending upon size, select from the options above to see full details.

This is the frame only version of our Demonstrator Market Stall product. The following items are available to purchase as optional extras as part of the full kit which is available here:

• Black Hammer Effect Painted Steel Market Stall Frame
• Tarpaulin (optional, more info below)
• 10 spring clamps (optional)
• 9mm exterior grade plywood counter boards (optional)

Please ensure that your vehicle can transport this Market Stall's longest bar length (see 'max length' in table below for full details).

Download the PDF data sheet for this Market Stall
(We're currently working on new data sheets for our market stalls. Consequently, some of the information contained in this data sheet may be very slightly out of date).

Steel Frame
Market Stall frames are manufactured from 25mm x 25mm (1 inch x 1 inch) steel box section tube, the industry standard for Market Stall frames. They are finished in a black hammerite paint. Frames slot together using a pin and socket system as pictured above.

Buyer note:
This is the frame only version of this product and does not include any accessories. Head here to purchase the full kit.

Our range of Mini Parts Market Stalls is ideal for Market Traders who make use of cars or small vans, the longest length in this assembly being just 4ft 0.5 inches. Whilst Mini Parts Market Stalls require more assembly due to more parts, they are also very flexible and, with the upper steelwork removed, they can also be used as simple tables ideal for both outdoor and indoor use (see possible assembly option images, below right). Mini Parts Traditional Market Stalls can also be extended very easily by purchasing additional legs and bars to increase overall length. Counter height is 30 inches.

This Market Stall is available in the following sizes:

• 6ft x 4ft
• 8ft x 4ft
• 10ft x 4ft
• 12ft x 4ft

Price varies depending upon size, select from the options above to see full details.

This is the frame only version of our Mini Parts Traditional Market Stall product. The following items are available to purchase as optional extras as part of the full kit which is available here:

• Black Hammer Effect Painted Steel Market Stall Frame
• Tarpaulin (optional)
• 10 x spring clamps (optional)
• 9mm exterior grade plywood counter boards (optional)

Please ensure that your vehicle can transport this Market Stall's longest bar length (see 'max length' in table below for full details).

Download the PDF data sheet for this Market Stall
(We're currently working on new data sheets for our market stalls. Consequently, some of the information contained in this data sheet may be very slightly out of date).

Steel Frame
Market Stall frames are manufactured from 25mm x 25mm (1 inch x 1 inch) steel box section tube, the industry standard for Market Stall frames. They are finished in a black hammerite paint. Frames slot together using a pin and socket system as pictured above.

Buyer note:
This is the frame only version of this product and does not include any accessories. Head here to purchase the full kit.

Our Standard Traditional Market Stalls are used by Market Traders for selling a large range of products. They are designed to fit in most medium sized vans that will take 7ft lengths (see table below for full details). Even with slightly more parts than our Basic Traditional Market Stall they are still easy to assemble and use and are built strong for a long life. Counter height is 30 inches.

This Market Stall is available in the following sizes:

• 8ft x 4ft
• 10ft x 4ft
• 12ft x 4ft
• 14ft x 4ft

Price varies depending upon size, select from the options above to see full details.

This is the frame only version of our Standard Traditional Market Stall product. The following items are available to purchase as optional extras as part of the full kit which is available here:

• Black Hammer Effect Painted Steel Market Stall Frame
• Tarpaulin (optional)
• 10 x spring clamps (optional)
• 9mm exterior grade plywood counter boards (optional)

Please ensure that your vehicle can transport this Market Stall's longest bar length (see 'max length' in table below for full details).

Download the PDF data sheet for this Market Stall
(We're currently working on new data sheets for our market stalls. Consequently, some of the information contained in this data sheet may be very slightly out of date).

Steel Frame
Market Stall frames are manufactured from 25mm x 25mm (1 inch x 1 inch) steel box section tube, the industry standard for Market Stall frames. They are finished in a black hammerite paint. Frames slot together using a pin and socket system as pictured above.

Buyer note:
This is the frame only version of this product and does not include any accessories. Head here to purchase the full kit.

Our Stepped Flower Market Stall is designed for the display of flowers in buckets. The integrated step display aids in creating a wall of flowers which is guaranteed to catch the eye of passers by, whether in the street or on the market.

This is the frame only version of our Stepped Flower Market Stall product. The following items are available to purchase as optional extras as part of the full kit which is available here:

• 6ft x 4ft
• 8ft x 4ft
• 10ft x 4ft

Price varies depending upon size, select from the options above to see full details.

The Flower Market Stall Kit price includes the following items:

• Black Hammer Effect Painted Steel Market Stall Frame
• Tarpaulin (optional)
• 10 x spring clamps (optional)
• 18mm exterior grade plywood shelves (optional)

Please ensure that your vehicle can transport this Market Stall's longest bar length (see 'max length' in table below for full details).

Download the PDF data sheet for this Market Stall
(We're currently working on new data sheets for our market stalls. Consequently, some of the information contained in this data sheet may be very slightly out of date).

Steel Frame
Market Stall frames are manufactured from 25mm x 25mm (1 inch x 1 inch) steel box section tube, the industry standard for Market Stall frames. They are finished in a black hammerite paint. Frames slot together using a pin and socket system as pictured above.

Buyer note:
This is the frame only version of this product and does not include any accessories. Head here to purchase the full kit.

Our Large Walk-In Market Stall with Ground Rail is often used by traders for displaying fashion goods but are ideal for a vast range of uses. This Market Stall does not include counters. You may also be interested in our range of tables or even our Walk-in Market Stall with Counters.

This framework can also be supplied with a 2ft overhang which is fitted to the front of the Market Stall, select from the options above to see pricing details.

This Market Stall is available in the following sizes:

• 20ft x 10ft
• 16ft x 16ft
• 20ft x 20ft
• 24ft x 16ft

Price varies depending upon size, select from the options above to see full details.

This is the frame only version of our Large Walk In Market Stall with Ground Rail product. The following items are available to purchase as optional extras as part of the full kit which is available here:

• Black Hammer Effect Painted Steel Market Stall Frame
• Heavy duty tarpaulins for roof, back and sides (optional)
• 20-30 spring clamps depending upon the size of the stall (optional)

Please ensure that your vehicle can transport this Market Stall's longest bar length (see 'max length' in table below for full details).

Size	# of parts	Weight (approx)	Max. length	Recommended tarpaulin
20ft x 10ft	22	90kg	10ft	23ft x 18ft to cover top and back Two 12ft x 9ft tarpaulins to cover sides
16ft x 16ft	30	109kg	8ft	23ft x 18ft to cover top and back 20ft x 15ft cut in half to cover sides
20ft x 20ft	30	126kg	10ft	29ft x 23ft to cover top and back 23ft x 18ft cut in half to cover sides
24ft x 16ft	22	146kg	8ft	29ft x 23ft to cover top and back 20ft x 15ft cut in half to cover sides

Download the PDF data sheet for this Market Stall
(We're currently working on new data sheets for our market stalls. Consequently, some of the information contained in this data sheet may be very slightly out of date).


Steel Frame
Market Stall frames are manufactured from 25mm x 25mm (1 inch x 1 inch) steel box section tube, the industry standard for Market Stall frames. They are finished in a black hammerite paint. Frames slot together using a pin and socket system as pictured above.

Learn More